Role of finite element analysis for selection of single point fixation in zygomaticomaxillary complex fracture.

BACKGROUND: One-point fixation was superior to the two and three-points fixation in minimally displaced zygomaticomaxillary complex (ZMC) fracture regarding the cost, invasiveness, scaring, number of wounds, and operation time. Accordingly, this study aimed to predict which one-point fixation is the most stable in managing minimally displaced ZMC fracture. MATERIAL & METHODS: This study simulated the different one-point fixation approaches on three ZMC models after fracture reduction and application of all forces exerted on the fractured area. The findings were represented as stress impact on the ZMC fracture and plating system as well as the inter-fragments micro-motion. RESULTS: The von misses stresses of plates for the zygomaticofrontal, infra-orbital rim, and zygomaticomaxillary buttress model were (66.508, 1.285, and1.16 MPa) respectively. While the screws' von misses for the infraorbital rim, zygomaticofrontal, and zygomaticomaxillary buttress models were (13.8, 4.05, and 1.60 MPa) respectively. Whereas, the maximum principles stress at zygomaticofrontal, zygomaticomaxillary buttress, and infraorbital rim models were (37.03, 37.01, and 34.46 MPa) respectively. In addition, the inter-fragment micro-motion for zygomaticomaxillary buttress, infraorbital rim, and zygomaticofrontal models were (0.26, 0.25, and 0.15 mm) respectively. CONCLUSION: One-point fixation at zygomaticomaxillary buttress is the preferred point because it is exposed to low stresses, and the inter-fragment micro-motion is within the approved limit with the elements in the same direction of fixation which indicates the rigid fixation. In addition, it is less palpable and scarless. TRIAL REGISTRATION: clinical trial.gov (NCT05819372) at 19/04/2023.

The Value of Intraoperative Computed Tomography in the Treatment of Zygomatic Complex Fractures.

BACKGROUND: Due to the complex anatomical morphology and lack of anatomic markers on the surface of zygomatic complex (ZMC), the treatment results of ZMC fractures are often suboptimal. PURPOSE: The study aimed to evaluate the effectiveness of intraoperative computed tomography (ICT) in the treatment of unilateral ZMC fractures, and further study the feasibility of ICT to replace early postoperative Computed Tomography (CT). STUDY DESIGN, SETTING, AND SAMPLE: The investigators designed a retrospective cohort study. Adult patients who underwent surgery with unilateral ZMC fractures were enrolled. PREDICTOR VARIABLE: According to whether intraoperative CT was used, the subjects were divided into the ICT group and the control group (without ICT). MAIN OUTCOME VARIABLES: Five distances and 3 angles representing bilateral ZMC symmetry were main outcome variables. The differences of outcome variables were compared between the 2 groups and the indices of ICT group were further compared with their postoperative indices. COVARIATES: Demographics (eg age), etiology (eg traffic injury), dysfunction (eg diplopia), and surgical approach (eg vestibular incision) were collected as covariates while we conducted clinical investigation, examination, and implementation. ANALYSES: The data were analyzed using independent-samples t test, paired-samples t test, Mann-Whitney U test, and χ2 test. P value < .05 was considered statistically significant. RESULTS: A total of 60 patients (18 to 59 years) were enrolled in this study. All median values of the measurements in the ICT group were smaller than those in the control group, and the differences of horizontal displacement distance (0.56 vs 1.02 mm), anteroposterior displacement distance (1.69 vs 2.34 mm, 0.90 vs 2.35 mm), horizontal angle of bilateral zygomatic arch (2.31 vs 4.19°), and horizontal angle of bilateral zygomatic process (1.77 vs 2.94°) were significantly different between the 2 groups with P value < .05. Moreover, there was no statistically significant difference in all indices between the intraoperatively and postoperatively injured sides in the ICT group. CONCLUSIONS: ICT can improve the treatment outcomes of ZMC fractures by evaluating the fracture reduction adequacy during surgery. Moreover, ICT can replace early postoperative CT.

Treatment of Sagittal Fracture of the Zygomatic Arch Root.

A sagittal fracture at the temporal root of the zygomatic arch (ZAR) often occurs as a component of zygomaticomaxillary complex (ZMC) fractures. However, this area is difficult to access, and anchorage is limited due to the unstable structure around it. Therefore, a preauricular approach using single-screw fixation is proposed, and this study reports its results and usefulness. Forty-four patients with sagittal fractures of ZAR occurring with ZMC fractures were evaluated from 2012 to 2021. Open reduction and internal fixation were performed on all patients with ZMC fractures. Closed reduction using Dingman incision and external finger pressure in group A (indirect approach; 30 patients) and single-screw fixation using a preauricular approach in group B (direct approach; 14 patients) were performed to address sagittal fractures in ZAR. For single-screw fixation, the additional mean operation time was 11.34±3.25 minutes. On postoperative 3-dimensional computed tomography and plain radiographs, group B showed more accurate reduction and less deformity and trismus ( P <0.05). Moreover, a normal diet was initiated more quickly in group B than in group A ( P <0.05). Some cases in group A showed nonunion or malunion. This study revealed that a direct approach (group B) toward sagittal fractures of ZAR is recommended due to more accurate results and fewer complications than those observed with the indirect approach (group A). Moreover, the total operation time and complications may be lesser than those with the bicoronal approach.

Pediatric Le Fort, Zygomatic, and Naso-Orbito-Ethmoid Fractures.

Fractures of the pediatric midface are infrequent, particularly in children in the primary dentition, due to the prominence of the upper face relative to the midface and mandible. With downward and forward growth of the face, there is an increasing frequency of midface injuries seen in children in the mixed and adult dentitions. Midface fracture patterns seen in young children are quite variable; those in children at or near skeletal maturity mimic patterns seen in adults. Non-displaced injuries can typically be managed with observation. Displaced fractures require treatment with appropriate reduction and fixation and longitudinal follow-up to evaluate growth.

Is three-point fixation needed to mechanically stabilize zygomaticomaxillary complex fractures?

Fixation is critical in zygomaticomaxillary complex (ZMC) fractures to avoid malunion; however, controversy exists as to how much hardware is required to achieve adequate stability. Current fixation regimens may not represent the minimum stabilization needed for uneventful healing. Craniomaxillofacial (CMF) computational models have shown limited load transmission through the infraorbital rim (IOR), and a previous experimental study of ZMC fractures has suggested that IOR plating does not alter CMF bone strain patterns. This study aimed to measure the impact of stabilization on fracture site displacement under muscle loading, testing the hypothesis that three-point fixation is not critical for ZMC fracture stability. Four ZMC complex fractures were simulated on two cadaveric samples and stabilized with three-point plating. Displacements simulating mouth openings of 20 mm and 30 mm were applied to the mandible using a custom apparatus. Fracture gap displacement under load was measured at multiple points along each fracture line, and bone strain was captured using a combination of uniaxial and rosette gauges. Data capture was repeated with the IOR plate removed (two-point fixation) and with the zygomaticomaxillary plate removed (one-point fixation). Fracture displacement under muscle loading was consistent, with gaps of less than 1 mm in 95% of cases (range 0.05-1.44 mm), reflecting clinical stability. Large variabilities were observed in the strain measurements, which may reflect the complexity of CMFS load patterns and the sensitivity of strain values to gauge placement. This study supports the concept of hardware reduction, suggesting that two-point (or even one-point) fixation may provide sufficient stability for a ZMC fracture under applied muscle loading.

E-scooters and maxillofacial fractures: a seven-year multi-centre retrospective review.

BACKGROUND: Standing electric scooters (e-scooters) are a cost-effective and environmentally-friendly transport alternative, but also elicit substantial concern regarding associated craniofacial injuries. This study aims to describe the patient factors, procedural factors and post-operative outcomes of maxillofacial fractures caused by e-scooter accidents. METHODS: Retrospective chart review of patients aged 18 years or older who were surgically treated for these injuries in 2014-2020 at two Australian tertiary hospitals. RESULTS: There were 18 cases included. Most cases were male (66%). The mean age was 35 years. Common risk factors were alcohol use (86%) and lack of helmet use (62%). The most common fracture pattern was zygomatico-maxillary complex (ZMC) fractures (50%). There were no associated systemic injuries. Mean operation timing was 12 days post-injury for ZMC fractures and 3 days post-injury for condyle fractures. For ZMC fractures, the most common method of fixation was 2-point fixation (66%). For condyle fractures, the most common surgical approach was arch bars only (83%). Post-operative complications were reported in six cases, with malocclusion being the most common (n = 3). Revision surgeries were performed in two cases. CONCLUSIONS: Maxillofacial fractures associated with e-scooter accidents appear to be increasing in incidence. Robust longitudinal evaluations with larger sample sizes are required to better understand associated presentations, surgical approaches and post-operative complications.

Ophthalmologic Outcomes in Zygomaticomaxillary Fracture Repair With and Without Orbital Floor Repair.

Introduction: Orbital floor (OF) fractures accompany all zygomaticomaxillary complex (ZMC) fractures, but guidelines for repair of OF fractures in this setting are unclear. Objectives: To compare ophthalmologic outcomes of ZMC repair with and without concurrent OF repair. Methods: We retrospectively reviewed patients undergoing ZMC fracture repair with and without OF repair between 2016 and 2018. Patients were reviewed for demographics, preinjury characteristics, and ophthalmologic outcomes. Results: Of 61 total patients, 32 underwent concomitant OF repair while the remaining 29 underwent ZMC repair alone. The OF repair group had increased OF fracture size, displacement in the coronal plane, and malar eminence displacement (p < 0.05). Eight patients in the OF repair group had postoperative diplopia compared with no patients in the group without OF repair (p < 0.05). Conclusion: Retrospective analysis of ZMC fracture repair without and with OF repair did not reveal a significant difference in short-term ophthalmologic outcomes while controlling for fracture size.

Critical Degree of Orbital Floor Displacement Drives Operative Repair of Zygomaticomaxillary Complex Fractures: Findings from a 10-Year Retrospective Study.

Among zygomaticomaxillary complex (ZMC) fractures presenting to a tertiary urban academic center, the authors hypothesized the presence of both clinical and radiographic predictors of operative management. The investigators conducted a retrospective cohort study of 1,914 patients with facial fractures managed at an academic medical center in New York City between 2008 and 2017. The predictor variables were based on both clinical data and features of pertinent imaging studies, and the outcome variable was an operative intervention. Descriptive and bivariate statistics were computed and the p-value was set at 0.05. In total, 196 patients sustained ZMC fractures (5.0%) and 121 (61.7%) ZMC fractures were treated surgically. All patients who presented with globe injury, blindness, retrobulbar injury, restricted gaze, or enophthalmos and a concurrent ZMC fracture were managed surgically. The most common surgical approach was the gingivobuccal corridor (31.9% of all approaches), and there were no significant immediate postoperative complications. Younger patients (38.9 ± 18 years vs. 56.1 ± 23.5 years, p < 0.0001) and patients with greater than or equal to 4 mm of orbital floor displacement were more likely to receive surgical treatment than observation (82 vs. 56%, p = 0.045), as were patients with comminuted orbital floor fractures (52 vs. 26%, p = 0.011). In this cohort, patients more likely to undergo surgical reduction were young patients with ophthalmologic symptoms on presentation and at least 4 mm displacement of the orbital floor. Low kinetic energy ZMC fractures may warrant surgical management as often as high-energy ZMC fractures. While orbital floor comminution has been shown to be a predictor for operative reduction, in this study we also demonstrated a difference in the rate of reduction based on the severity of orbital floor displacement. This may have significant implications in both the triage and selection of patients most suitable for operative repair.

Maxillary Tuberosity Fractures Following Third Molar Extraction, Prevalence, and Risk Factors.

OBJECTIVES: The aim of this study was to evaluate the prevalence of maxillary tuberosity fractures in an adult population and to examine the different risk factors associated with these fractures. MATERIALS AND METHODS: This is a retrospective study; data was collected from medical records of patients who underwent a non-surgical extraction of a maxillary third molar tooth between January 2017 and March 2019. All extractions were performed by 2 maxillofacial specialists. RESULTS: A total of 403 extracted maxillary third molar teeth were included in the study. Out of them 73 cases of tuberosity fractures were recorded (18.1%). No significant difference in the number of recorded fractures was found between the 2 surgeons. The mean age of patients was 32.8 ± 11.5. In the age group of 30 years and under a fractures rate of 12.1% was recorded compared to 25.0% in the age group of over 30 (P = 0.001). Divergent or extremely curved root morphology were associated with a higher risk for fractures (30.7%) compared to convergent root morphology (13.1%) ( P < 0.001). Borderline significance ( P = 0.069) was observed for extractions of teeth with caries lesions (21.9%) compared to teeth with no caries lesions (14.6%). CONCLUSIONS: The risk of developing a tuberosity fracture during an extraction of an upper wisdom tooth increases with age by 3.1% per year. Teeth with a caries lesion or teeth with divergent or extremely curved root morphology are associated with a higher risk for tuberosity fractures. Although, distoangular teeth had reduced risk of developing a tuberosity fractures. Data collected in this study may help to evaluate the risk factors associated with tuberosity fractures, and can assist in minimizing complications during extractions.

Surgical treatment of fractures of the zygomaticomaxillary complex: effect of fixation on repositioning and stability. A systematic review.

Management of zygomaticomaxillary complex (ZMC) fractures can be challenging. Consequently, there is a difference in treatment amongst clinicians. In the literature it remains unclear if the number of fixation points affects the quality of the anatomical reduction, stability through time, and potential complications. Therefore, the objective of this study was to assess the outcome of no fixation, one-point fixation and multiple-point fixation of ZMC fractures. MEDLINE, EMBASE and The Cochrane Central Register of Controlled Trials were searched to identify eligible studies. After screening 925 articles, 17 studies fulfilled the inclusion criteria. Based on this systematic review no clear conclusions can be drawn on how stability, repositioning, and postoperative complications are affected by the number of fixation points. Nevertheless, it can be concluded that the advantage of multiple approaches is direct visualisation, and the downside is potentially approach-related complications. This review suggests that intraoperatively assisted cone-beam computed tomography (CBCT) can help improve the quality of the repositioning and by minimising the number of fixation points, the number of postoperative complications could be further reduced.

Application of Computer-Aided Design and Individualized Templates for Bilateral Zygomaticomaxillary Complex Fractures.

PURPOSE: Reduction of the bilateral zygomaticomaxillary complex (ZMC) fracture with individualized templates based on computer- aided surgical simulation system. To evaluate the practicality and accuracy of this approach in the treatment of bilateral ZMC fracture. METHODS: Sixteen patients with bilateral ZMC fractures were collected to create a study model. The authors reconstruct the ZMC on one side via the three-dimensional (3D) model, and then mirrored to the opposite side. Multiple individualized templates were made based on the 3D model, and used as intraoperative guidance to reduce fractures. After surgery, the facial symmetry and the position of zygoma were observed. The mouth opening, pupil level, and sensation of infraorbital nerve were evaluated. Some mark points on zygoma were measured and the postoperative horizontal asymmetry rate (H) was calculated. Besides, orbital height and width were measured. RESULTS: For all patients, the position of bilateral ZMC was basically restored. The patients with restriction of mouth opening all recovered to normal. The H values were less than 3.0% at all mark points. There was almost no difference in bilateral orbital width and height. Meanwhile, there was no significant difference between the preoperative measurements of the ideal virtual 3D model and the postoperative measurements of patients. CONCLUSIONS: The study proves that application of computer-aided design and individualized templates can accurately guide the reduction operation of ZMC fracture, restore the ideal shape of ZMC, and obtain good facial symmetry.

Efficacy of surgical navigation in zygomaticomaxillary complex fractures: randomized controlled trial.

Accurate reduction is of vital importance in the treatment of zygomaticomaxillary complex (ZMC) fractures. Computer-assisted navigation systems (CANS) have been employed in ZMC fractures to improve the accuracy of surgical reduction. However, randomized controlled trials on this subject are rare and the benefits of CANS remain controversial. The aim of this study was to compare reduction errors between navigation-aided and conventional surgical treatment for ZMC fractures. Thirty-eight patients with unilateral type B ZMC fractures were enrolled. Preoperative computed tomography data were imported into ProPlan software for virtual surgical planning. Open reduction and internal fixation was performed with CANS (experimental group) or without CANS (control group). Postoperative computed tomography scans were obtained to examine the difference between surgical planning and the actual postoperative outcome, namely reduction errors. The median translational reduction errors in the X, Y, and Z axes were 0.80 mm, 0.40 mm, and 0.80 mm, respectively, in the experimental group and 0.53 mm, 0.86 mm, and 0.83 mm, respectively, in the control group (P > 0.05). The median rotational reduction errors in pitch, roll, and yaw were 0.92°, 2.47°, and 1.54°, respectively, in the experimental group and 1.45°, 3.68°, and 0.76°, respectively, in the control group (P > 0.05). In conclusion, compared with conventional reduction surgery, navigation-aided surgery showed no significant improvement in reduction accuracy in the treatment of type B ZMC fractures (Chinese Clinical Trial Registry, registration number ChiCTR1800015559).

Experience of orbital floor fractures in a UK level one trauma centre: a focus on the surgical approach and lid-related complications.

The two surgical approaches to access orbital fractures are transconjunctival and transcutaneous. The aim of this study was to assess the outcomes of orbital repairs with a focus on lid-related complications and their management. A retrospective analysis was carried out over a five-year period (January 2015 to January 2020) to assess all consecutive orbital repairs in our unit. Data were collected for variables including demographics, fracture pattern, surgical approach, and details of postoperative complications. A total of 111 patients were included in the study, 94 were male (85%), the majority being between 16 and 45 years of age. A total of 46 (41%) had isolated orbital floor fractures, 31 (28%) zygomaticomaxillary complex, and 18 (16%) Le Fort pattern fractures. Eighty per cent (n = 91) received a transconjunctival approach as first choice. In the transconjunctival group, six (6.6%) had entropion and increased scleral show, four (4.4%) had ectropion, and none had canthal malposition. In the transcutaneous group (n = 20) there was a higher rate of ectropion (25%, n = 5), a lower rate of entropion (n = 1, 5%) and higher rate of increased scleral show (n = 2, 10%). Factors associated with a higher rate of complications included complex fractures, use of conjunctival sutures, and increased length of time to surgery. Seventy-two per cent of patients who suffered entropion required further surgical treatment. The most common complication of the transconjunctival approach was entropion, and clinicians should have a low threshold for early surgical management. We feel that this should be part of the consenting process, especially in high-risk cases.

Success of day-case treatment of zygomatic and orbital fractures.

Traditionally, surgical management of zygomaticomaxillary complex (ZMC) and orbital fractures occurs within two to three weeks of the injury, followed by an overnight admission to allow for extended eye observations. This is due to the risk of postoperative retrobulbar haemorrhage (RBH) or orbital compartment syndrome (OCS), a rapidly progressive and sight threatening emergency that requires immediate intervention. In September 2016 the oral and maxillofacial surgery (OMFS) department at Leeds Teaching Hospitals redesigned their trauma service with a full-time trauma consultant, a dedicated clinic, and a weekly morning elective trauma theatre list. This allowed for standardisation of the management of patients with OMFS injuries. Furthermore, a formal day-case ZMC and orbital fracture pathway was developed to allow patients to undergo surgical management of such fractures with a same-day discharge. This has since been identified as an area of excellence by the Getting It Right First Time (GIRFT) programme, and is in line with the addition of ZMC and orbital fractures to the procedural list written by the British Association of Day Case Surgery (BADS). Unbeknown to the unit, the volume of day-case procedures was the highest within the UK, demonstrating the importance of GIRFT in highlighting areas of good or unique practice. The aim of this study was to determine the impact of our day-case pathway and designated OMFS trauma service on compliance with recent recommendations by GIRFT and BADS. Secondly, it was to determine the safety of same-day discharge with regards to postoperative complications.

Zygomaticomaxillary Fractures.

Fractures of the zygomaticomaxillary complex and zygomatic arch are common athletic injuries. Fracture displacement can lead to midfacial retrusion and widening, causing noticeable deformity. Associated signs and symptoms include hypoesthesia of the infraorbital nerve distribution, trismus, and subjective malocclusion. Operative treatment is indicated in cases of significant displacement or functional disturbance. The approach and details of osteosynthesis are catered to the specific characteristics of the fracture. Technology, such as virtual surgical planning, intraoperative navigation, and intraoperative imaging, has the potential to improve accuracy of treating challenging fractures.

A Novel Method for Quantitative Three-Dimensional Analysis of Zygomatico-Maxillary Complex Symmetry.

OBJECTIVE: To develop a reliable and accurate method to quantify the symmetry of the zygomaticomaxillary complex (ZMC). METHODS: Virtual three-dimensional models were created from 53 computed-tomography scans: 15 healthy cases without maxillofacial disorders and 38 patients with ZMC fractures requiring surgical treatment.Asymmetry of the ZMC was measured using a mirroring and surface-based matching technique that uses the anterior cranial fossa as reference to determine the symmetrical position of the ZMC. The measure for ZMC asymmetry was defined as mean surface distance (MSD) between the ZMC-surface and the symmetrical position.Reliability of the method was tested in the 15 healthy cases. Inter-and intra-observer correlation coefficients (Ce) and variabilities were assessed. Accuracy was assessed by comparing ZMC asymmetry between healthy and ZMC fracture cases, and by assessing correlation of ZMC fracture severity with ZMC asymmetry. RESULTS: The average MSD of the 15 healthy cases was 1.40 ± 0.54 mm and the average MSD of the 38 ZMC fracture cases was 2.69 ± 0.95 mm ( P < 0.01). Zygomaticomaxillary complex asymmetry correlated with fracture severity ( P = 0.01). Intra-rater CC was 0.97 with an intra-rater variability of 0.09 ± 0.11 mm. Inter-rater Ce was 0.95 with an inter-rater variability of 0.12 ± 0.13 mm. CONCLUSIONS: Our method is reliable and accurate for quantitative three-dimensional analysis of ZMC-symmetry. It takes into account asymmetry caused by the shape of the ZMC as well as asymmetry caused by the position of the ZMC. CLINICAL RELEVANCE: This method is useful for the evaluation of ZMC asymmetry associated with congenital and acquired disorders of craniofacial skeleton, for surgical planning and for evaluation of postoperative results.

Zygomaticomaxillary complex fracture repair with intraoperative CBCT imaging. A prospective cohort study.

The aim of this study was to evaluate the value of intraoperative conebeam computed tomography (CBCT) imaging in the treatment of zygomaticomaxillary complex (ZMC) fractures. A prospective single center cohort study was performed. Included were consecutive patients who underwent surgery for a unilateral ZMC fracture. An intraoperative CBCT scan was performed after reduction of the ZMC fracture. Revision reduction was performed of the ZMC and/or orbital floor (OF) on indication. The preoperative and postoperative asymmetry of the outer surface of the ZMC was measured on digital 3D-models of CBCT scans, using a mirroring and surface-based matching technique. The postoperative asymmetry of the ZMC in the study group was compared to the asymmetry of the ZMC in the control group with healthy individuals. A total of 38 patients with a unilateral ZMC fracture were included. The mean postoperative asymmetry in the study group (1.67 mm, SD 0.89) was less than the mean preoperative asymmetry (2.69 mm, SD 0.95) (paired samples T-test p < 0.01) but showed no statistically significant difference with the mean asymmetry in the healthy control group (1.40 mm, SD 0.54) (independent samples T-test p = 0.31). Revision reduction of the ZMC and/or OF fracture had been performed in 11 cases after malalignment was noted on the intraoperative CBCT. The indication for intraoperative revision reduction was associated with comminuted ZMC fractures and/or fractures with indication for OF reduction (Pearson Chi Square p < 0.01). Within the limitations of the study, intraoperative CBCT imaging seemed to have a positive influence on ZMC fracture treatment, especially in the case of comminuted ZMC fractures and/or fractures with indication for OF treatment.

Evaluation of Zygomaticosphenoidal Angle in Patients With Unilateral Zygomaticomaxillary Complex Fracture.

ABSTRACT: This study aimed to assess the zygomaticosphenoidal (ZS) angle in patients with reducted unilateral zygomatico-maxillary complex (ZMC) fracture and compare it with the normal control group. This study was performed on CT images of 60 cases and 60 controls with a mean age of 35.1 ±â€Š14.6. The ZS angle was measured on axial images containing the equator of the eyeball. Moreover, the mean absolute difference value and asymmetry index were calculated. Chi-square test, independent-sample t test, 1-way ANOVA, paired-sample t test, and ROC curve analysis were applied. The mean ZS angle in the control group was 46.6°â€Š±â€Š3.5°. Considering laterality, the mean of ZS was not significant in the control group. However, after reduction of unilateral ZMC fracture, there was a significant difference between the mean ZS angle in right and left sides. The mean absolute difference between right and left ZS angles was significantly higher in the case group. A threshold number of 0.9° is established in the mean absolute difference value which is the difference between the right and left ZS angles in an individual for detecting asymmetry. The ZS angle can be a useful anatomical aid to guide surgeons in achieving facial symmetry in ZMC fractures.

Maxillofacial fractures surgically treated: a 3-year experience of a Cuban hospital.

AIM: The aim of the study was to characterize the maxillofacial fractures surgically treated in a Cuban hospital. MATERIALS AND METHODS: This was a descriptive and retrospective cross-sectional study based on the medical records of patients attended between January 1, 2017 and December 31, 2019 in the Maxillofacial Surgery Department of Carlos Manuel de Céspedes General University Hospital, Cuba. Age, gender, residency, municipality, etiology, month and year of trauma, number and type of fractures, and alcohol consumption at the time of trauma were recorded. RESULTS: 126 cases and 304 fractures were investigated. Males were the most affected (n = 115; 91.27%). The main etiology was interpersonal violence (IPV) (46.03%). Seventy-one (56.35%) patients had zygomatico-maxillary complex fractures. In the multivariate analysis, alcohol consumption was significantly lower as the age increased (a PR: 0.989; confidence interval [CI] 95%: 0.979-0.99; p = 0.026), as well as in those patients who lived in urban zones (a PR: 0.57; CI 95%: 0.44-0.74; p < 0.001), adjusted by the side of the fracture and the municipality. CONCLUSIONS: The profile of the maxillofacial fractures in this Cuban hospital seems to be mixed by age, affecting young people and the elderly. IPV was the major cause of maxillofacial fractures, while zygomatico-maxillary complex bones and mandible were the most affected maxillofacial areas.

OBJETIVO: Caracterizar las fracturas maxilofaciales tratadas quirúrgicamente en un hospital cubano. MATERIAL Y MÉTODOS: estudio descriptivo, retrospectivo y transversal basado en las historias clínicas de los pacientes atendidos entre el 1 de enero de 2017 y el 31 de diciembre del 2019 en el departamento de Cirugía Maxilofacial del Hospital General Universitario Carlos Manuel de Céspedes. Las variables estudiadas fueron: edad, sexo, residencia, municipio, etiología, mes y año del trauma, número y tipos de fracturas, y consumo de alcohol. RESULTADOS: Se estudiaron 126 pacientes con 304 fracturas. Los hombres fueron los más afectados (n = 115; 91.27%). La principal etiología fue la violencia interpersonal (46,03%). 71 pacientes tuvieron fracturas del complejo cigomático-maxilar. En el análisis multivariado, se encontró que el consumo de alcohol fue menor conforme aumentaba la edad (RPa: 0,989; IC 95%: 0,979-0,99; p = 0,026), así como en los pacientes que vivían en la zona urbana (RPa: 0,57; IC 95%: 0,44-0,74; p < 0,001); ajustados por el lado de la fractura y el municipio de residencia. CONCLUSIONES: El perfil de las fracturas maxilofaciales en este hospital cubano muestra afectación tanto de jóvenes como adultos. La violencia interpersonal fue la principal etiología de las fracturas y las áreas más afectadas fueron la cigomático-maxilar y mandibular.